S40C steel plate/sheet - Henan Seed Steel Metal Materials Co., Ltd.


Steel grade show

AM 09: 00 ~ PM 06:00

HOME  >  Steel grade show >  JIS  >  S40C steel plate/sheet

S40C steel plate/sheet

Name:S40C steel plate/sheet

Material:S40C

Standard:JIS G 4051

Thickness:Thickness: 6-80mm, Width: 1360-3000mm, Length: 6000-12000mm

Price:FOB/CIF/CFR

DeliveryTime:15-30days, 7days for ready products

PaymentTerms:100%payment against B/L copy,the original documents will be mailed after payment received

MinimumOrderQuantity:flexible trial order

S40C steel plate/sheet


S40C steel plate/sheet is one of mainly high carbon steel,S40C has high strength and good machinability, cold plastic deformation of medium, good weldability, after quenching and tempering after welding, heat treatment, no temper brittleness, but lower hardenability. Bear the load for a small section of the larger pieces of quenched large normalizing or stress smaller parts and the Ministry of strength less demanding on the heart surface, hardening the surface wear parts, such as crankshafts, spindles, drive shaft, connecting rod,etc., the equivalent steel grades of S40C are DIN 1C40 and AISI 1040.

Delivery condition


AR(As Hot Rolled), N(Normalized), T(Tempered), Q(Quenched), TMCP, Q+T(Quenched and Tempered), UT(Ultrasonic Test: ASTM A435,  ASTM A578-C/B/A, EN10160-S0E1, S1E2, S2E3, S3E4), Impact Test, PWHT(Post Weld Heat Treatment), HIC, Z Test(Z15, Z25, Z35)

Chemical Composition of S40C


GradeCSiMn

P(%)

max

S(%)

max

Cr(%)

max

Ni(%)

max

Cu(%)

max

S45C
0.37-0.43
0.15-0.35
0.60-0.90
0.030
0.030
0.25
0.25
0.25

Mechanical Properties of S40C


Tensile

Strength

-σb(MPa)

Yield Strength

-σS(MPa)

Elon-

Gation Ration

-δ5 (%)

Reduction of area

-Psi(%)

Impact merit

-AKV (J)

Resilient value

-AKV(J/cm2)

Degree of

-hardness

Annealed

-steel

Test

Specimen

-Size

(mm)

≥570
≥335
≥19
≥45
≥47
≥59
≤217HB
≤187HB
25

Steel products delivery guarantee:

1. According to the standard of container shipment.

2. Steel packaging is moistureproof and abrasionproof.

3. The ship is low safety risk, arrives quickly, and delivery in time.


1.DO you have factory?

We act as main distributors of goverment owned mills, and we have our own machining centers for cutting and simple machining jobs.

2.Where is your factory?

Our representative mills located in Henan, Shangdong, Jiangxi, Guangdong provinces,etc.

3.Can you send us the sample?

It should be according to our stock status and samples are available when we have suitable stocks.

4.How about the delivery time?

Normally we can keep 40 days in average with mill run schedule, for stocks within 10 days. All delivery terms are on basis to Chinese loading port.

5.What payment terms can you accept?

T/T or L/C. For special requests about the payment, please indicate us first then we will check the availability.

7, What is your MOQ?

MOQ for mill run should meet 5tons per size in normal condtions, which should follow the schedules of our mills when inquiry time.

8, What is your shipping port?

Tianjin, Shanghai, Qingdao, etc. All loading ports in China are ok for us.

9,Could i visit the factory by myself?

Surely you can, please inform us your plan in advance so we can arrange some people to take you have a look around our mills/ factories.

10.Can you give me the Manufactory Test Certificate?

For sure we can supply some samples for your reference.




CONTACT  
* Name :
Phone :
Contact :
Mobile :
*Mailbox :
MESSAGE  
*Topic :
*Content :