AM 09: 00 ~ PM 06:00
Hardox 500 steel plate
Name：Hardox 500 steel plate
Material：Wear resistant Hardox 500,Hardox 500 steel plate
Thickness：Thickness: 6-80mm, Width: 1360-3000mm, Length: 6000-12000mm
PaymentTerms：100% payment against B/L copy, the original documents will be mailed after payment received
Hardox 500 is a bendable and weldable abrasion resistant plate which is used in applications that demand higher wear resistance.
HARDOX 500 is an abrasion resistant plate with a hardness of 500 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 500offers very good weldability
AR(As Hot Rolled), N(Normalized), T(Tempered), Q(Quenched), TMCP, Q+T(Quenched and Tempered), UT(Ultrasonic Test:ASTM A435,ASTM A578-C/B/A,EN10160-S0E1,S1E2,S2E3,S3E4), Impact Test, PWHT(Post Weld Heat Treatment), HIC, Z Test(Z15, Z25, Z35)
Chemical Composition of Hardox 500 steel sheet
|C Max %||Si Max %||Mn Max %||P Max %||S Max %||Cr Max %||Ni Max %||Mo Max %||B Max %|
Mechanical Properties of Hardox 500
|Grade||Tensile strength||Yield strength||Elongation||Impact energy|
Steel products delivery guarantee:
1. According to the standard of container shipment.
2. Steel packaging is moistureproof and abrasionproof.
3. The ship is low safety risk, arrives quickly, and delivery in time.
1.DO you have factory?
We act as main distributors of goverment owned mills, and we have our own machining centers for cutting and simple machining jobs.
2.Where is your factory?
Our representative mills located in Henan, Shangdong, Jiangxi, Guangdong provinces,etc.
3.Can you send us the sample?
It should be according to our stock status and samples are available when we have suitable stocks.
4.How about the delivery time?
Normally we can keep 40 days in average with mill run schedule, for stocks within 10 days. All delivery terms are on basis to Chinese loading port.
5.What payment terms can you accept?
T/T or L/C. For special requests about the payment, please indicate us first then we will check the availability.
7, What is your MOQ?
MOQ for mill run should meet 5tons per size in normal condtions, which should follow the schedules of our mills when inquiry time.
8, What is your shipping port?
Tianjin, Shanghai, Qingdao, etc. All loading ports in China are ok for us.
9,Could i visit the factory by myself?
Surely you can, please inform us your plan in advance so we can arrange some people to take you have a look around our mills/ factories.
10.Can you give me the Manufactory Test Certificate?
For sure we can supply some samples for your reference.
Standard: EN ASTM SAE API DIN JIS